Storage Resource Manager Enterprise Edition Installation Guide

Storage Resource Manager Enterprise Edition 6–21
Installing and Registering Plug-ins
Using the Plug-In Registration Wizard
When registering a SmartArray controller with the SRM Server, provide the following
information in the Required Registration Information dialog box:
• Host Name — Enter the network name of the system in which the SmartArray
controller to be scanned is installed.
• SRM Display Name — Enter the name of the SmartArray that you want
displayed in SRM reports. This name is arbitrary. It can be any name that has
meaning in your enterprise storage network.
If you successfully registered the SmartArray controller, it is located in the group
named RAID Group.
Editing Scan Proxy Information
Using SRM, you can edit the proxy system settings for a registered SmartArray RAID
controller. This consists of changing the SRM Agent computer to use for computer
scans.
To edit scan proxy information:
1. Launch SRM.
2. Click the Options tab, and then click the Scans notebook.
3. In the navigation pane, click select proxy. The Select Proxy dialog box displays.
4. Next to the RAID option, click Modify. The Modify Scan Settings for RAID
dialog box displays.
5. In the Select a managed object list box, choose the RAID subsystem you want to
modify, and make the necessary changes.
You can change the following setting:
• Computer Scan Agent — Enter the name of a managed SRM Agent computer
that has the correct plug-in installed on it. If you select an SRM 4.0B Agent
computer that does not have the correct plug-in installed, all computer scans for
the selected SmartArray controller fail.
Brocade Plug-In
This section provides additional information about installing and registering a
Brocade Plug-In.