Storage Resource Manager Enterprise Edition Installation Guide

4–34 Storage Resource Manager Enterprise Edition
Installation
The use of this Agent is according to the terms of the particular
SRM license that you have (e.g. commercial, evaluation).
You may register this OpenVMS Agent only with Compaq SANworks
Storage Resource Manager Enterprise Edition servers.
1 - Accept the above NOTICE and Continue with Registration
2 - Not Accept the above NOTICE and Exit Registration
Enter selection:
10. Enter 1 and press Enter to accept the above notice.
Enter selection: 1
You see the following messages:
In order to register this Agent with an SRM Server several questions
will be asked to identify the types of storage devices on this system
that the Agent should report to the SRM Server, along with specifics
on how to contact the SRM Server and how the SRM Server should
contact the Agent.
The Agent Configuration specifies which type of storage devices this
Agent should report to the SRM server.
Choices are:
Cluster = cluster devices only (no private devices)
Private = private devices only (no cluster devices)
Both = both cluster and private devices
11. Enter the Agent's configuration, or press Enter to accept the default. For example:
Enter Agent's Configuration: [Private] private
NOTE: For examples of configuration choices see, “Configuring SRM OpenVMS Agents” later
in this chapter.
You see the following message:
Agent's SRM Name is a short name used to uniquely identify this
Agent in SRM Server reports. It is normally the host name or cluster
alias name (if this Agent is to act on behalf of the cluster), but it must
be unique to the SRM Server.
12. Enter the Agent's SRM Name (host name). For example:
Enter Agent's SRM Name (e.g. host name): engineering_private
You see the following message:
Agent Contact Name is the full host name (or IP address) that the
SRM Server should use to contact the Agent. If this Agent is to act on