Storage Resource Manager Enterprise Edition Installation Guide

5–10 Storage Resource Manager Enterprise Edition
Modifying Installation Settings
NOTE: If you are not successful, you will return to the Agent configuration options menu. You
will need to unregister the Agent again.
SRM$AGENT Configuration
Service is defined in the SYSUAF.
Service directory exists.
Service is defined in the TCP/IP SERVICE database.
Service is enabled on specific node.
Agent is not registered.
SRM$AGENT configuration options:
1 - Register Agent with an SRM Server
2 - Disable service on this node
E - Exit SRM$AGENT configuration
7. Enter option 2 to disable the service or option E to exit the installation program.
Disabling the SRM for OpenVMS Agent
Once all the Agents are unregistered, you can disable the service.
NOTE: The directories in this procedure are examples and might differ from your OpenVMS
systems.
1. At the OpenVMS prompt, enter the following command:
set default [directory name of Agent location]
You see the files in the default directory.
2. At the prompt, enter the following command:
@srm$agent_config.com
The following message appears:
SRM$AGENT Configuration Procedure
This procedure helps you define the parameters required to run
Compaq Storage Resource Manager Agent for OpenVMS on this
system.
Please select the TCP/IP stack running on this system:
1 - UCX or Digital TCP/IP Services
2 - TCPware
E - Exit SRM$AGENT configuration
3. Select the appropriate TCP/IP stack.
Enter Selection: [1] 1