User's Manual

ManualsBrandsHP ManualsSoftwareComputer Accessories AA-RTDKA-TE

HSV Element Manager Event Codes

49Storage Management Appliance Software Event Code Definitions Application Notes

3441 88030d71 2 d 71 Storage Cell: %1 Event Code: %2 Description: An internal Drive Enclosure

Environmental Monitoring Unit error has occurred. This problem was detected by

the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure

identified in the dencl_num field within the rack identified in the rack_num field.

The rack_num field will not be valid until a future release. The

alarm_error_code.field.en field contains the value 1 signifying that the Drive

Enclosure Environmental Monitoring Unit is the affected element. The cause of

the improper operation is described by the content of the

alarm_error_code.field.ec field as follows: 3 = A drive enclosure power supply

was shut down. 16 = The Drive Enclosure Environmental Monitoring Unit ESI data

has been corrupted.

3442 88030d72 3 d 72 Storage Cell: %1 Event Code: %2 Description: A Drive Enclosure Environmental

Monitoring Unit is unable to collect data for the SCSI-3 Engineering Services

(SES) page. This problem was detected by the Drive Enclosure Environmental

Monitoring Unit located in the drive enclosure identified in the dencl_num field

within the rack identified in the rack_num field. The rack_num field will not be

valid until a future release. The alarm_error_code.field.en field contains the value

1 signifying that the Drive Enclosure Environmental Monitoring Unit is the

affected element.

3454 88030d7e 3 d 7e Storage Cell: %1 Event Code: %2 Description: Invalid data was read from a

Drive Enclosure Environmental Monitoring Unit NVRAM. This problem was

detected by the Drive Enclosure Environmental Monitoring Unit located in the

drive enclosure identified in the dencl_num field within the rack identified in the

rack_num field. The rack_num field will not be valid until a future release. The

alarm_error_code.field.en field contains the value 1 signifying that the Drive

Enclosure Environmental Monitoring Unit is the affected element.

3455 88030d7f 3 d 7f Storage Cell: %1 Event Code: %2 Description: An internal Drive Enclosure

Environmental Monitoring Unit error has occurred. This problem was detected by

the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure

identified in the dencl_num field within the rack identified in the rack_num field.

The rack_num field will not be valid until a future release. The

alarm_error_code.field.en field contains the value 1 signifying that the Drive

Enclosure Environmental Monitoring Unit is the affected element. The cause of

the improper operation is described by the content of the

alarm_error_code.field.ec field as follows: 11 = The Drive Enclosure

Environmental Monitoring Unit cannot write data to the NVRAM. 12 = The Drive

Enclosure Environmental Monitoring Unit cannot read data from the NVRAM. 13

= The Field Programmable Gate Array (FPGA) that controls the ESI bus failed to

load information required for Drive Enclosure Environmental Monitoring Unit

operation.

3458 88030d82 3 d 82 Storage Cell: %1 Event Code: %2 Description: A drive enclosure’s address is

incorrect or the enclosure has no address. This problem was detected by the

Drive Enclosure Environmental Monitoring Unit located in the drive enclosure

identified in the dencl_num field within the rack identified in the rack_num field.

The rack_num field will not be valid until a future release. The

alarm_error_code.field.en field contains the value 1 signifying that the Drive

Enclosure Environmental Monitoring Unit is the affected element.

Table 8: HSV Element Manager Event Codes: Controller Events (Continued)

Event

Code

Sev-

erity

SWC

Evt.

No.

Description