User Guide
7 Work with cartridges
To ensure the best print quality from the printer, you need to perform some simple maintenance procedures.
TIP: If you have problems copying documents, see Printing issues.
This section contains the following topics:
●
Information on cartridges and the printhead
●
Some color ink is used even when printing with black cartridge only
●
Check the estimated ink levels
●
Replace the cartridges
●
Order ink cartridges
●
Store printing supplies
●
Anonymous usage information storage
●
Cartridge warranty information
Information on cartridges and the printhead
The following tips help maintain HP cartridges and ensure consistent print quality.
● The instructions in this guide are for replacing cartridges, and are not intended for rst time installation.
● Keep all cartridges in the original sealed packages until they are needed.
● Be sure to turn o the printer properly. For more information, see Turn the printer o .
● Store cartridges at room temperature (15-35° C or 59-95° F).
● Do not clean the printhead unnecessarily. This wastes ink and shortens the life of the cartridges.
● Handle cartridges carefully. Dropping, jarring, or rough handling during installation can cause temporary
printing problems.
● If you are transporting the printer, do the following to prevent ink leaking from the printer or other
damage from occurring to the printer:
– Make sure you turn o the printer by pressing (the Power button). Wait until all sounds of
internal motion stop before unplugging the printer.
– Make sure you leave the cartridges installed.
– The printer must be transported sitting at; it should not be placed on its side, back, front, or top.
CAUTION: HP recommends that you replace any missing cartridges as soon as possible to avoid print quality
issues and possible extra ink usage or damage to the ink system. Never turn o the printer when cartridges
are missing.
94 Chapter 7 Work with cartridges ENWW