User Guide

● IP Address
● Subnet Mask
● Default Gateway
● DNS Address
6. Enter your changes, and then touch Done .
7. Touch OK .
Use Wi-Fi Direct
With Wi-Fi Direct, you can print wirelessly from a computer, smartphone, tablet, or other wireless-capable
device—without connecting to an existing wireless network.
Guidelines for using Wi-Fi Direct
● Make sure your computer or mobile device has the necessary software.
– If you are using a computer, make sure you have installed the HP printer software.
If you have not installed the HP printer software on the computer, connect to Wi-Fi Direct rst and
then install the printer software. Select
Wireless when prompted by the printer software for a
connection type.
– If you are using a mobile device, make sure you have installed a compatible printing app. For more
information, visit the HP Mobile Printing website at www.hp.com/go/mobileprinting. If a local
version of this website is not available in your country/region or language, you might be directed to
the HP Mobile Printing website in another country/region or language.
● Make sure Wi-Fi Direct for your printer is turned on.
● Up to ve computers and mobile devices can use the same Wi-Fi Direct connection.
● Wi-Fi Direct can be used while the printer is also connected either to a computer using a USB cable or to
a network using a wireless connection.
● Wi-Fi Direct cannot be used to connect a computer, mobile device, or printer to the Internet.
To turn on Wi-Fi Direct
1. From the printer control panel, touch or swipe down the tab at the top of the screen to open the
Dashboard, and then touch
(Wi-Fi Direct).
2. Touch ( Settings ).
3. If the display shows that Wi-Fi Direct is O , touch Wi-Fi Direct and then switch it on.
TIP: You can also turn on Wi-Fi Direct from the EWS. For more information about using the EWS, see
Embedded web server.
ENWW Use Wi-Fi Direct 103