User Guide

To clear a paper jam from Tray 1
1. Pull Tray 1 out of the printer completely.
2. Check the gap in the printer where the input tray was. Reach into the gap and remove the jammed paper.
3. Insert Tray 1 back into the printer.
To clear a paper jam from Tray 2
NOTE: Tray 2 is available with some models of the printer.
Pull Tray 2 out of the printer completely, and then remove any jammed paper if possible. If the jam
cannot be cleared in this way, do the following:
a. Lift the printer o Tray 2.
b. Remove any jammed paper from the bottom of the printer or from the input tray.
c. Reposition the printer on the top of the input tray.
To clear a paper jam from the front of the printer
1. Slide up to open the cartridge access door.
ENWW Jams and paper-feed issues 111