User Guide

11. Lift, push back, and close the duplex door.
12. Insert the input tray.
To clear a paper jam from the duplex area
1. Remove Tray 1 by pulling it out from the printer.
2. Open the duplex door (above where the tray was), by holding the center and pulling it towards you.
3. Remove any jammed paper.
4. Lift, push back, and close the duplex door.
5. Insert the input tray.
To clear a paper jam from the rear of the printer
1. Turn to the rear of the printer.
2. Press the two tabs on the rear access door and open the door.
3. Remove any jammed paper.
114 Chapter 10 Solve a problem ENWW