User Guide
2. Lift the document feeder cover.
This provides easy access to the rollers (1) and separator pad (2).
1 Rollers
2 Separator pad
3. Lightly dampen a clean lint-free cloth with distilled water, then squeeze any excess liquid from the cloth.
4. Use the damp cloth to wipe any residue o the rollers or separator pad.
NOTE: If the residue does not come o using distilled water, try using isopropyl (rubbing) alcohol.
5. Close the cover of the document feeder.
Maintain the printhead and cartridges
If you are experiencing problems with printing, you might have a problem with the printhead. You should
perform the procedures in the following sections only when directed to do so for resolving print quality
issues.
Performing the aligning and cleaning procedures unnecessarily can waste ink and shorten the life of the
cartridges.
● Clean the printhead if your printed output is streaked or has any incorrect or missing colors.
There are three stages of cleaning. Each stage lasts about two minutes, uses one sheet of paper, and
uses an increasing amount of ink. After each stage, review the quality of the printed page. You should
only initiate the next phase of cleaning if the print quality is poor.
If print quality still seems poor after you complete all stages of cleaning, try aligning the printhead. If
print quality problems persist after cleaning and aligning, contact HP support. For more information, see
HP support.
● Align the printhead when the printer status page shows streaking or white lines through any of the
blocks of color, or if you are having print quality issues with your printouts.
The printer automatically aligns the printhead during the initial setup.
140 Chapter 10 Solve a problem ENWW