User Guide

3. Insert the paper in portrait orientation and with the side to be printed facing down.
Make sure the stack of paper is aligned with the appropriate paper size lines on the front of the tray. In
addition, make sure the stack of paper does not exceed the stack height marking on the right edge of
the tray.
NOTE: Do not load paper while the printer is printing.
4. Adjust the paper-width guides and the paper-length guide until they touch the edge of the stack of
paper.
5. Check the input tray area underneath the printer. If there is paper, remove the paper.
6. Reinsert the input tray into the printer.
To load an envelope
1. Pull out the input tray completely.
2. If there is other paper in the input tray, remove the paper.
20 Chapter 2 Get started ENWW