User Guide
To scan an original from HP printer software (OS X)
1. Open HP Easy Scan.
HP Easy Scan is located in the Applications folder.
2. Click Scan .
3. Choose the type of scan prole you want and follow the onscreen instructions.
Scan to a memory device
You can scan directly to a USB ash drive from the printer control panel without using a computer or the HP
printer software.
CAUTION: Do not remove the ash drive from the printer USB port while it is being accessed by the printer.
This can damage the les on the USB ash drive. You can safely remove a USB ash drive only when the USB
port light is not blinking.
NOTE: The printer does not support encrypted USB ash drives.
You can also use the HP printer software to scan documents into editable text. For more information, see
Scanning documents as editable text.
To scan an original to a memory device from the printer control panel
1. Load your original print-side down on the scanner glass or print-side up in the document feeder.
2. Insert a USB ash drive.
3. Touch Scan , and then select Memory Device.
4. Make changes to scan options, if needed.
5. Touch Start Scan .
Scan to email
●
Scan to email through Scan tab
●
Scan to email through Scan-to-Email app
Scan to email through Scan tab
This section contains the following topics:
●
Set up Scan to Email
●
Scan a document or photo to email
Set up Scan to Email
To set up Scan to Email
You need to set up email addresses rst, and then scan and email your documents.
NOTE: You need a network-connected computer to set up Scan to Email.
ENWW Scan 43