User's Manual

Enabling and disabling system configuration options
NOTE: Some of the items listed below may not be supported by your computer.
To enable or disable devices or security options:
1. Select Start > All Programs > HP ProtectTools Security Manager.
2. In the left pane, click BIOS Configuration.
3. Type your Computer Setup administrator password at the BIOS administrator password prompt,
and then click OK.
4. In the left pane, click System Configuration, and then enable or disable a system configuration
option, or configure any of the following system configuration options in the right pane:
Port Options
Serial Port
Infrared Port
Parallel Port
SD Slot
USB Port
1394 Port
Cardbus Slot
ExpressCard slot
Boot Options
F9, F10, and F12 Delay (Sec)
MultiBoot
Express Boot Popup Delay (Sec)
CD-ROM Boot
Floppy Boot
Internal Network Adapter Boot
Internal Network Adapter Boot Mode (PXE or RPL)
Boot Order
Device Configurations
NumLock at Boot
Swapping fn/Ctrl Keys
Multiple Pointing Devices
USB Legacy Support
Parallel port mode (standard, bidirectional, EPP, or ECP)
Data Execution Prevention
44 Chapter 5 BIOS Configuration for HP ProtectTools ENWW