User`s guide

HP PCL Printer Commands and Control Codes A-1
A
HP PCL Printer Commands and Control Codes
HP PCL Printer Command Summary
Table A-1. HP PCL Printer Command Summary
Command Topic
Printer Feature Printer Command Decimal Equivalent Hex Equivalent
Printer Control Commands
Reset and Self-Test
Control
Reset E
c
E 027 069 1B 45
Self-test E
c
z 027 122 1B 7A
Paper Input Control
(Media Source)
Eject page E
c
&
¬
0H 027 038 108 048 072 1B 26 6C 30 48
Feed from tray E
c
&
¬
1H 027 038 108 049 072 1B 26 6C 31 48
Manual feed E
c
&
¬
2H 027 038 108 050 072 1B 26 6C 32 48
Print Mode Unidirectional left to right E
c
&k0W 027 038 107 048 087 1B 26 6B 30 57
Bidirectional E
c
&k1W 027 038 107 049 087 1B 26 6B 31 57
Unidirectional right to left E
c
&k2W 027 038 107 050 087 1B 26 6B 32 57
Dry Time Dry time in seconds E
c
&b#T 027 038 098 # 084 1B 26 62 # 54
Underline Single fixed E
c
&d1D 027 038 100 049 068 1B 26 64 31 44
Double fixed E
c
&d2D 027 038 100 050 068 1B 26 64 32 44
Single float E
c
&d3D 027 038 100 051 068 1B 26 64 33 44
Double float E
c
&d4D 027 038 100 052 068 1B 26 64 34 44
Turn off E
c
&d@ 027 038 100 064 1B 26 64 40
Line Termination CR=CR, LF=LF, FF=FF E
c
&k0G 027 038 107 048 071 1B 26 6B 30 47
CR=CR+LF, LF=LF, FF=FF E
c
&k1G 027 038 107 049 071 1B 26 6B 31 47
CR=CR, LF=CR+LF, FF=CR+FF E
c
&k2G 027 038 107 050 071 1B 26 6B 32 47
CR=CR+LF, LF=CR+LF, FF=CR+FF E
c
&k3G 027 038 107 051 071 1B 26 6B 33 47
End-of-Line Wrap Turn on E
c
&s0C 027 038 115 048 067 1B 26 73 30 43
Turn off E
c
&s1C 027 038 115 049 067 1B 26 73 31 43
Transparent Print
Data
No. of bytes E
c
&p#X[data] 027 038 112 #...# 088 1B 26 70 #...# 58
Enhancement
Control
3
Line-by-line on E
c
&k0E 027 038 107 048 069 1B 26 6B 30 45
Line-by-line off E
c
&k1E 027 038 107 049 069 1B 26 6B 31 45
Display Functions Turn on E
c
Y 027 089 1B 59
Turn off E
c
Z 027 090 1B 5A
SI/SO Control
1
Line-by-line on E
c
&k0F 027 038 107 048 070 1B 26 6B 30 46
Line-by-line off E
c
&k1F 027 038 107 049 070 1B 26 6B 31 46
# Indicates the numeric value field.
1. This is an obsolete command. Hewlett-Packard suggests that it not be used in code developed for HP DeskJet printers.