User`s guide

Operation and Usage 3-3
Normal Printing from the Paper Tray
1 If you are using legal, executive, B5 size paper, envelopes, labels and thick paper, you will have to feed these into the printer manually, one by one . See the section
on “Manual Single Load”.
1. Open the paper tray and extend it to either the A4 or the
LTR (US Letter)
1
mark.
2. Switch the media size selector (A4/LTR) according to the
size of the paper that you are loading in: either A4 or US
letter.
3. Insert a stack of paper into the paper tray with the print
side down. If you are loading letterheads or HP
transparencies, insert them print side down, with the top
of the page going into the printer.
4. Move the paper width guide so that it presses lightly
against the paper stack.
A4
LTR
A4
LTR
A4
LTR
A4
LTR