Manual

Appendix A - Printer lights reference98
Resume light blinks, left and right print cartridge lights on. Media jam or pick motor stall.
• Clear the jammed paper. See Troubleshooting
installation issues. After clearing the jam, press
(Resume button) to continue the print job.
If no paper jam exists, press (Resume button). If
this does not work, try turning the printer off and
then on again, and resend the print job.
Resume light blinks, left and right print cartridge lights cycle. Media jam or switch motor stall.
• Clear the jammed paper. See Troubleshooting
installation issues. After clearing the jam, press
(Resume button) to continue the print job.
If no paper jam exists, press (Resume button). If
this does not work, try turning the printer off and
then on again, and resend the print job.
Power light on, resume light blinks, right print cartridge light turns
on twice as long as off.
Ink service module almost full.
• If you have a replacement for the ink service
module, replace it immediately by following the
instructions that came with it.
• Otherwise, visit:
http://www.hp.com/support/dj460 or contact
Customer Support to get a replacement. See
Support and warranty.
In the meantime, you can press (Resume button)
to continue printing, but this light error state will
remain until the ink service module is replaced.
When the ink service module is full, the printer will
stop printing.
Power light on, resume light on, right print cartridge light turns on
twice as long as off.
Ink service module full.
• If you have a replacement for the ink service
module, replace it immediately by following the
instructions that come with it.
• Otherwise, visit:
http://www.hp.com/support/dj460 or call
Customer Support to get a replacement.
In the meantime, you can remove the black print
cartridge and print using only the tri-color print
cartridge. The color results and print speed may be
affected. See Printing with a single print cartridge.
Power light, resume light, left and right print cartridge lights blink. Printer error.
• Press (Resume button) to print the error code.
Press (Power button) to reset the printer.
Light description and light pattern Explanation and recommended action