User's Manual

●
Full: The stacker is full, and you must remove the stacked paper in order to continue printing.
●
Busy: The stacker is being cleaned, and you must wait for the cleaning procedure to finish.
●
Upgrading firmware: The stacker firmware is being updated, and you must wait for the updating
procedure to finish.
●
Jam: The stacker is jammed, and you must clear the jam in order to continue printing.
●
Open: The stacker door is open, and you must close it in order to continue printing.
●
Detached: The stacker is detached from the printer, and you must attach it in order to continue printing.
●
Disabled: The stacker is disabled, and printing will continue without using the stacker.
●
Communication error: The printer cannot communicate with the stacker; the stacker may be turned off
or disconnected from the printer.
●
Internal error: The stacker is not working correctly for some unknown reason. An error code is
displayed on the front panel; follow the instructions there.
14 Chapter 3 Printers ENWW