Instruction Manual

C H A P T E R 2 HP e-Commerce Server Accelerator SA7100/7120 User Guide
6
Installing the SA7100/SA7120 Free-Standing or
in a Rack
The HP e-Commerce Server Accelerator SA7100/SA7120 is
physically installed in either of two ways:
• In a standard 19” rack, cantilevered from the provided mounting
brackets.
• Free-standing on a flat surface with sufficient space for air-flow.
Rack
Installation
Rack mounting requires the use of the mounting brackets, and all four
of the included Phillips screws.
1. Locate the two mounting brackets and the four screws. (Two
screws for each bracket.)
2. Attach a mounting bracket to each side of the SA7100/SA7120,
using two of the provided screws for each bracket. Use the holes
near the front of the SA7100/SA7120’s sides. The brackets have
both round and oval holes; the flange with round holes attaches
to the SA7100/SA7120, the flange with oval holes to the rack.
Mounting Bracket Orientation
3. Position the SA7100/SA7120 in the desired space of your 19”
rack and attach the front flange of each mounting bracket to the
rack with two screws each. (Rack-mounting screws are not
provided.)