Table of Contents About this Guide ...........................................................................5 FCC Statement ..............................................................................5 WEEE Notice..................................................................................5 CE Regulatory Notice ....................................................................6 Notes on Installation ....................................................................6 Caution ....................
Using the Car Recorder ................................................ 18 3.1 3.2 4 Recording Videos ........................................................... 18 3.1.1 Record videos while driving ............................... 18 3.1.2 Manual Video Recording .................................... 18 3.1.3 Emergency Recording ........................................ 19 3.1.4 The Recording Screen ........................................ 20 3.1.5 Taking Snapshot................................
About this Guide The content in this document is for information purpose and is subject to change without prior notice. We made every effort to ensure that this User Guide is accurate and complete. However, no liability is assumed for any errors and omissions that may have occurred. The manufacturer reserves the right to change the technical specifications without prior notice.
CE Regulatory Notice Here with confirm to comply with the requirements set out in the Council Directives on the Approximation of the Laws of the Member States relating Electromagnetic Compatibility of Radio and Telecom device (1995/5/EC); the Low Voltage Directive (2006/95/EC); the Restriction of The Use of Certain Hazardous Substances in Electrical And Electronic Equipment Directive (2002/95/EC), Turkish EEE Directive; the Commission Regulation (EC) No 1275/2008 implementing Directive 2005/32/EC of the Eur
The results of GPS positioning are only for reference, and should not affect the actual driving situation. The feature cannot ensure the location accuracy. GPS location accuracy may differ depending on weather and location such as high buildings, tunnels, undergrounds, or forests. GPS satellite signals cannot pass through solid materials (except glass). Tinted window may affect the performance of the GPS satellite reception. GPS reception performance on each device may differ.
1 Introduction Thank you for purchasing this advanced Car Recorder. This device is specifically designed for real time video and audio recording when driving. 1.1 Features Full HD camera (1920x1080 @ 30fps) 2.4” LCD color screen 130 degree Wide angle lens Motion detection Automatic Emergency recording for collision detection Supports micro-SDHC up to 32GB (Class 6 or greater speed required for HD video recording) 1.2 Package Contents The package contains the following items.
1.3 Product Overview Front View Top and Bottom Views 8 1 9 2 10 7 Side (Left and Right) Views 11 Rear View 3 5 4 6 No. Item 12 13 No.
2 Getting Started 2.1 Inserting the Memory Card Insert the memory card with the gold contacts facing the back of the camcorder. Push the memory card until it clicks into place. (Use class 6 or above the micro SD cards for this camcorder; It is recommended to format the micro SD cards before the initial use.) To remove the memory card Push the edge of the memory card inward until you hear/feel it click, then allow it to push out until you can remove it from the slot. Note: 1.
2.2 Installing in Vehicles 2.2.1 Mount to Windshield 1. Attach the bracket to the device. Slide it into the bracket holder until you hear a click. 2. With the suction-cup laying flat, position the suction-cup on the windshield. 3. Hold the base firmly on the windshield and press down the clamp to mount the car holder to the windshield. Make sure the base is securely locked in place. Warning: Do not install the device on a tinted window. Doing so may damage the tint film.
2.2.2 Adjust the device position 1. Loosen the knob to swivel the device vertically. Knob 2. Loosen the knob to swivel the device horizontally up to 360°. Knob 3. Then tighten the knobs to make sure the device is securely locked in place.
2.3 Connecting to Power Use only the supplied car adapter to power up the device and charge the built-in battery. 1. Connect one end of the car adapter to the USB connector of the camcorder. 2. Plug the other end of the car charger to the cigarette lighter socket of your vehicle. Once the vehicle engine is started, the camcorder automatically powers on. Note: 1. The orange LED lights up while the battery is charging. 2.
2.4 Powering the Camcorder On / Off 2.4.1 Auto Power On/Off Once the vehicle engine is started, the camcorder automatically turns on. If the Automatic Record function is enabled, the recording will automatically start right after the camcorder powers on. See Set Automatic Recording (2.5.1). Once the vehicle engine shuts down, the camcorder automatically saves the recording and turns off the power within 10 seconds. See Delay Shutdown (4.2). 2.4.
2.5 Initial Settings Before using the device, we recommend you enable the Automatic Record function and set up the correct date and time. 2.5.1 Set Automatic Recording To enable the recording to start automatically after you turn on the power, do the following: button to enter the OSD menu. 1. Press the 2. / button to select Press the Automatic Record and press the button. 3. / Press the and press the 4. Press the button to select On button. button to exit the menu. 2.5.
Note: 1. When the battery is drained dry and the satellite synchronization is off , the user must reset the date/time before the function -automatic record is started. If the user doesn't reset the date/time, the device will give you alert after one minutes and the automatic record will be started . 2. But if the satellite synchronized ,the device can do automatic record immediately. 2.5.
City Accra UTC 0 City UTC Budapest * City UTC +1 Houston * City UTC -6 Melbourne + 10 City UTC Santiago -4 Addis Ababa +3 Buenos Aires -3 Indianapolis * -5 Mexico City * -6 Santo Domingo -4 Adelaide ** +9 Cairo +2 Islamabad +5 Miami * -5 São Paulo -3 Algiers +1 Calgary * -7 Istanbul * +2 Minneapolis * -6 Seattle * -8 Almaty +6 Canberra + 10 Jakarta +7 Minsk +3 Seoul +9 Amman * +2 Cape Town +2 Jerusalem * +2 Montevideo -3 Shanghai +8 Amsterdam
3 Using the Car Recorder 3.1 Recording Videos 3.1.1 Record videos while driving When the vehicle engine starts up and the Automatic Record function is enabled, the camcorder automatically turns on and starts recording. Recording will automatically stop when the engine is switched off. button to stop recording manually. Or, press the Note: On some cars, the recording will continue when the engine is switched off.
3.1.3 Manual Video Recording 1. Press the 2. Press the button to start recording. button to stop recording. Note: 1. One video file is saved for every 3 or 5 minutes of recording. See Using the Menu (4.1). 2. The device saves the recording on the memory card. If the memory card capacity is full, the oldest file in the memory card is overwritten. 3.1.4 Emergency Recording During normal video recording, press the button to begin emergency recording mode.
3.1.5 The Recording Screen 7 8 9 1 2 3 10 4 11 5 6 12 No. Item 1 Duration 2 Voice Record Description Indicates the current recording duration. Indicates sound will not be recorded with the video. Enter the OSD menu to enable "Voice Record". There are two options for the Smart Scene Mode: 1. Drive Priority 3 Smart Scene Mode 4 Date and time Indicates the current recording date and time. 5 Guide icon (Menu) button During video recording, press the to view the 4 GRID FUNCTION DISPLAY.
8 GPS icon When a GPS fix is established, the icon " " will show on the top-right corner of the screen. 9 Battery Indicates the estimated remaining battery power or if it is being charged. 10 Prompt : reset of date / time Prompt : NOT reset of date / time 11 Guide icon (Stop) 12 Guide icon (Emergency) Press the button to stop the recording. Press the button to continuously record the video in one file until the recording is manually stopped. 3.1.
3.1.7 4 GRID FUNCTION DISPLAY in the LCD screen Push the button when recording to switch to the 4 GRID FUNCTION DISPLAY on the LCD screen. 1 3 2 4 No. Item 1 Approximate current driving speed 2 Time 3 Approximate compass driving direction 4 Estimated distance warning to the speed camera set points Note: The driving speed and driving direction will grayed out if GPS has no signal.
3.2 Playback Videos and Photos 1. If recording is in progress, press the The standby screen is displayed. 2. Press the 3. / button to select the Press the file category that you want to browse and press the button. 4. / button to view the Press the next or the previous file and press the button to view the file in full screen. button to stop recording. button to enter the OSD menu.
3.2.1 Playing Videos To play videos, do the following: button to stop recording. 1. If recording is in progress, press the 2. Press the 3. Press the button. 4. / button to select Video or Emergency and press Press the the button. 5. / button to browse Press the for the desired video file and press the button to play the video. 6. button to pause the Press the playback. Press it again to resume. button to enter the OSD menu. / button to select File Playback and press the 3.2.
3.2.3 The Playback Screen Video Playback Screen Photo Playback Screen 7 1 7 6 2 3 4 5 2 3 4 No. Item Description 1 Date and time 2 Guide icon (Back) Press the display. 3 Guide icon (Previous) Press the button to view the previous video/photo. 4 Guide icon (Next) Press the button to view the next video/photo. 5 Guide icon (Pause) Press the button to pause the video playback. 6 Duration Indicates the elapse time. 7 Battery Indicates the estimated remaining battery power.
3.2.4 Deleting Files To delete file(s), do the following: 1. If recording is in progress, press the 2. Press the 3. / button to select File Press the Deletion and press the button. 4. / button to select the Press the file category and press the button. 5. Press the / button to select the file that you want to delete and press the button to enter the Delete menu. 6. Press the Item 7. button to stop recording. button to enter the OSD menu. / button to select an option.
4 Adjusting the Settings 4.1 Using the Menu You can customize the video recording and other general settings via the on-screen display (OSD) menus. button to stop recording. 1. If recording is in progress, press the 2. Press the 3. / button to select a menu option and press the Press the button to enter the selected menu. 4. / button to select the desired setting and press the Press the button to confirm the setting. 5. Press the button to open the OSD menu. button to exit the menu.
4.2 Menu Tree Refer to the below table for details on menu items and available menu options. Menu option Description File Playback Select the file category that you want to view. Satellite Status Displays the current state of the satellite reception. Satellite Synchronizatio n Automatically synchronize with the local satellite time. When this feature is enabled, the system will use the satellite time, and you cannot manually change the time. Please review section 2.5.3 for details.
Menu option Description Available option Driver Fatigue Alert When enabled, the camcorder sounds an audible tone after an hour of driving. On / Off LCD Setting Set the duration for the display to automatically turn off right after video recording starts. On / Turn Off After 30 sec. / Turn Off After 3 min. / Off Voice Record Enable or disable sound recording with the video.
Menu option Delay Shutdown Description Set the delay duration before turning off the power. Available option 10 sec. / Off Speed Position Management Add speed point: The satellite positioning will manually add speed to the camera location. You can add up to 200 speed camera locations to the built-in system. Delete speed point: All added speed camera locations will be deleted. Add speed point / Delete speed point Speed Limit Alert Set a customized maximum speed limit.
Menu option Description Available option TV standard Set the TV type based on your local region. NTSC / PAL Format Format the memory card. Warning: Once a format has been initiated, ALL content on the micro SD card will be deleted CANNOT be restored or recovered. Yes / No Default Reset all options to the factory default settings.
5 Installing the Software 1. Place the CD disc bundled with the car camcorder in your PC/Laptop optical drive. 2. If the CD does not execute automatically, please use Windows File Manager to execute the Install_CD.exe file in the CD. The following screen will be displayed. 3. Select the desired [Menu] item to start the installation process according to the instructions on-screen.
6 SuperCar 7 8 9 10 11 12 13 14 15 1 2 3 4 16 5 6 No. Item No. Item 1 Video Player 9 File Path 2 Play / Pause 10 Browser File 3 Previous 11 File List 4 Next 12 File Name 5 Stop 13 Volume 6 Google Map 14 Current Duration / Total Duration 7 Compass 15 GPS sensitivity Chart (SNR) 8 Speed Meter 16 G-Sensor sensitivity Chart Note: 1. To display the route on Google Maps, please make sure the internet is connected before starting the video playback 2.
7 Specifications Item Description Image sensor 1/3” CMOS sensor Effective pixels 2048 (H) x 1536 (V) Storage media Supports Micro SDHC, up to 32GB class 6 or above LCD display Lens Focus range Movie Clip 2.4” LCD color TFT (112K pixels) Wide Angle Fixed Focus lens F1.9 ; f=2.95mm 1.5m~Infinity Resolution: Full HD (1920 x 1080), 30fps HD (1280 x 720), 30fps Format: MOV Still image (Photograph) Resolution: 3M (2048 x 1536) Format: DCF (JPEG, Exif: 2.
Item Battery Operating Temperature Description Built-in 470mAH Li-polymer rechargeable (This battery is NOT replaceable) -10° ~ 60° C Operating Humidity 20 ~ 70% RH Storage Temperature -20° ~ 80° C Dimensions 63 x 70 x 28.7 mm Weight Approx. 94g (3.