User's Manual

RIP settings
For detailed operating instructions, refer to the RIP user guide.
Choose a resolution
The print resolution is determined by the RIP. There is no resolution setting on the printer.
●
For most images, use 600x600 dpi.
●
If a grainy image is acceptable (when viewed from a longer distance or as a draft, for example) and
faster print speeds are desired, use 600x300 dpi.
●
For more saturated colors or printing on clear or backlit media, use 1200x600 dpi.
Choose a color profile
●
Select the profile that matches the media name, or most closely matches the material, you are
using.
●
For accurate color matching, perform a color calibration (linearization) at least once for each media.
●
To reduce ink usage, select an Ink Saver profile. or create a custom profile that uses less ink. Ink
Saver profiles are available for the Onyx and Caldera RIPs to their registered users. For download
instructions,see the manufacturer's web site (Onyx,
http://www.onyxgfx.com; Caldera,
http://www.caldera.eu). Users of the HP RIP Software can create a custom profile to reduce ink
usage. Refer to the HP RIP Software User Guide for instructions on creating a custom profile.
ENWW RIP settings 109