User's Manual

No
HP Scitex FB950 Printer
Image Quality Flowchart
1. STARTUP AND CHECK JET HEALTH
© Hewlett-Packard Development Company, L.P.
START
LOAD
MEDIA
• Clean media, check for damage.
• Configure media (User Guide, Chapter 2).
• Load media (User Guide, Chapter 2).
CHECK
JET HEALTH
Run AutoJet.
(Menu > Calibrate > Auto Calibrations > AutoJet Calibration)
(User Guide, Chapter 4)
Repeat Print Prime Bars and check quality again.
 If OK, go to next page.
 If not OK, check calibrations and troubleshooting. Repeat
Print Jet Out Lines and check quality again.
(Calibrations: User Guide, Chapter 4)
(Troubleshooting: page 110)
Is today’s Prime Bars print
comparable to
yesterday’s best
Prime Bars print?
Yes
3. Print Prime Bars, compare to previous day’s print.
Verify jet replacement with Jet Out Lines.
If all jets working or replaced, go to next page; else run
AutoJet (see below).
(Menu > Tools > Maintenance > Print Jet Out Lines)
(User Guide, Chapter 4)
DAILY
STARTUP
TO
PAGE 2
1. Print Prime Bars
2. Purge and Wipe the heads