HP x20LED, x22LED, x22LEDc and x23LED Monitors User Guide
© 2010 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.
Table of Contents About This Guide 1. Product Features HP LCD Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. Safety and Maintenance Guidelines Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . .
A. Troubleshooting Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Getting Support from hp.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing to Call Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.
2. Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the "Connecting the Power Cable" section on Chapter 3 . WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature.
• Install your monitor near a power outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord. • Do not allow anything to rest on the power cord. Do not walk on the cord Maintenance Guidelines To enhance the performance and extend the life of the monitor: • Do not open the monitor cabinet or attempt to service this product yourself.
3. Setting Up the Monitor Unpacking the Monitor 1. Unpack the monitor. Make sure all contents are included. Store the packing box. 2. Turn off the computer and other attached devices. 3. Prepare a flat area to assemble the monitor. You may need a flat, soft, protected area for placing the monitor screen-down while preparing it for installation. Installing the Monitor 1. Set the monitor screen face down on a flat, soft, protected table or desk surface with the support column overhanging the edge. 2.
Connecting Monitor Cables Connecting the VGA (Analog) Cable or DVI-D (Digital) Cable Use a VGA video cable or a DVI-D cable to connect your monitor to your computer. To use DVI, you must have a DVI-compliant graphic card. Connectors are located on the back of the monitor. Be sure the computer and monitor are turned off and unplugged. 1.
Figure 3-4 Connecting the power cable 2. Connect one end of the power cable to the adapter and the other end to a grounded electrical outlet. 3. Connect the adapter plug to the monitor DC Jack. 6 Chapter 3.
4. Operating the Monitor CD Software and Utilities The CD that is included with this monitor contains drivers and software that you can install on your computer. Installing Drivers If you determine that you need to update the drivers, you can install the monitor driver INF and ICM files from the CD, or download them from the Internet. Installing the monitor driver software from the CD To install the monitor driver software from the CD: 1. Insert the CD in your computer CD drive. The CD menu appears. 2.
Front-Panel Controls The monitor buttons are located on the bottom of the front panel Figure 4-1 Front-panel control button No. Icon Description 1 Power Turns the monitor on or puts it in standby or sleep mode. The Power depending on the model. 2 Menu Opens, selects, or exits the OSD menu. 3 + Navigates forward through the OSD menu and increases adjustment levels. 4 - Navigates backward through the OSD menu and decreases adjustment levels.
Using the On-Screen Display (OSD) Main Menu Item Luminance Main Menu Icon 1st Sub Menu Item 2nd Sub Menu Item Contrast N/A Contrast from Digital-register. Each step will increase/ decrease value by 1 0-100 Recall Warm Contrast Value Brightness N/A Backlight Adjustment Each step will increase/ decrease value by 1 0-100 Recall Warm Brightness Value Eco Mode N/A Picture Adjustment, Brightness = 90, Contrast = 50.
Main Menu Item Image Setup Main Menu Icon 1st Sub Menu Item 2nd Sub Menu Item Clock N/A Description Adjust picture Clock to reduce Vertical-Line noise. Adjust Range Reset Value 0-100 Do Auto Configure Each step will increase/ decrease value by 1 10 Phase N/A Adjust Picture Phase to reduce Horizontal-Line noise. 0-100 Do Auto Configure H. Position N/A Adjust the horizontal position of the picture. 0-100 Do Auto Configure V. Position N/A Adjust the vertical position of the picture.
Main Menu Item Color Temp. Main Menu Icon Sub Menu Item Adjust Range Description Warm Recall Warm Color Temperature. N/A Normal Recall Normal Color Temperature. N/A Cool Recall Cool Color Temperature. N/A sRGB (for select models with sRGB function) Recall sRGB Color Temperature. N/A Red Red Gain from Digitalregister. 0-100 Reset Value The Color Temperature will be set to Warm. The User R/G/B value (default is 50) will be modified by Reset function in user mode.
Main Menu Item Main Menu Icon OSD Setup Sub Menu Item H. Position Description Adjust the horizontal position of the OSD. Adjust Range Reset Value 0-100 Recall 50 Value 0-100 Recall 50 Value 5-100 Recall 10 Value Each step will increase/ decrease value by 5 V. Position Adjust the vertical position of the OSD. Each step will increase/ decrease value by 5 Timeout Adjust the OSD timeout. Each step will increase/ decrease value by 5 Language Set OSD display language to English.
Main Menu Item Extra Main Menu Icon Sub Menu Item Input Select Adjust Range Description Select video input signal. D-SUB DVI DDC/CI Select DDC/CI on or off Reset Value Note: AnalogOnly Model no "Input Select" item. On Off Reset Information ENWW Clear each old status of Autoconfiguration and set the color temperature to Warm. Yes Do not execute reset, return to main menu. No Show the resolution, H/V frequency.
Selecting Video Input Connectors The input connectors are: • VGA connector (analog) • DVI-D connector (digital) The monitor automatically determines which inputs have valid video signals, and displays the image. You can connect the VGA cable, the DVI-D cable, or both. If both cables are installed, the default input selection is DVI.The source of input can be switched using the Input Select option in the OSD menu.
Power-Saver Feature When the monitor is in normal operating mode, the Power light is blue and the monitor uses the normal watts of power. For power usage, refer to "Technical Specification" (Appendix B). The monitor also supports a power-saver mode that is controlled by the computer. When the monitor is in the reduced-power state, the monitor screen is blank, the backlight is off, and the Power light is amber. The monitor uses minimum power.
A. Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions: Problem • Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor. • Make sure the external power adapter is connected to DCinput on the rear of the monitor. • In order for the Plug & Play feature of the monitor to work, you need a Plug & Play compatible computer & video card.
Problem Possible Solutions Horizontal or vertical disturbances on the screen • Adjust CLOCK and Phase or press the Auto button to display ideal setting. To optimize the screen performance for VGA input, use the Auto button button on the monitor and the auto-adjustment pattern software utility on the CD provided. For DVI input, adjust the video graphics card installed in the PC. Getting Support from hp.com Before you contact customer service, refer to HP Technical Support at: http://www.hp.
B. Technical Specifications All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. HP LCD Monitors Face treatment: Glare polarizer with hard coating Input terminal: VGA connector DVI-D 24-pin D-type connector Table B-1 Model x20LED Specifications: Display Type: TFT LCD active matrix Viewable Image Size 50.8 cm (20 in.) diagonal Tilt -4° (+/-2)~+13° (+/-2) Maximum Weight (unpacked) 2.7 kg(5.
Table B-2 Model x22LED/ x22LEDc Specifications: Display Type: TFT LCD active matrix Viewable Image Size 54.6 cm (21.5 in.) diagonal Tilt -4° (+/-2)~+13° (+/-2) Maximum Weight (unpacked) 2.9 kg(6.4 lbs) Dimensions (h x w x d) 525.5 mm x 376.0 mm x 165.9 mm 20.6 x 14.8 x 6.5 in Maximum Graphics Resolution 1920 x 1080 @ 60 Hz Optimum Graphics Resolution 1920 x 1080 @ 60 Hz Text Mode 720 x 400 Dot Pitch 0.248 x 0.248 mm/0.01 x 0.
Table B-3 Model x23LED Specifications: Display Type: TFT LCD active matrix Viewable Image Size 58.4 cm (23 in.) diagonal Tilt -4° (+/-2)~+13° (+/-2) Maximum Weight (unpacked) 3.6 kg(7.9 lbs) Dimensions (h x w x d) 569.3 mm x 407.8 mm x 185.9 mm 22.4 x 16 x 7.3 in Maximum Graphics Resolution 1920 x 1080 @ 60 Hz Optimum Graphics Resolution 1920 x 1080 @ 60 Hz Text Mode 720 x 400 Dot Pitch 0.265 x 0.265 mm/0.01 x 0.
Preset Video Modes The monitor automatically recognizes many preset video input modes that will appear properly sized and centered on the screen. Table B-4 Factory Preset Video Input Modes, x20LED model Item Preset Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 1 640 x 480 31.469 59.94 2 720 x 400 31.469 70.087 3 800 x 600 37.879 60.317 4 1024 x 768 48.363 60.004 5 1280 x720 45.00 60.00 6 1280 x 1024 63.981 60.02 7 1400 x 900 55.935 59.887 8 1600 x 900 60.
LCD Monitor Quality and Pixel Policy Your LCD Monitor uses high-precision technology, manufactured according to high standards, to help guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots. This is common to all LCD displays used in products supplied by all vendors and is not specific to your LCD Monitor. These imperfections are caused by one or more defective pixels or subpixels.
C. Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Declaration of Conformity for Products Marked with the FCC Logo (United States Only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. For questions regarding the product, contact: Hewlett Packard Company P. O.
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth). xxxx* This marking is valid for EU non-harmonized Telecom products . *Notified body number (used only if applicable - refer to the product label) The official EU CE declaration of conformity for this device may be found at http://www.hp.eu/certificates. The point of contact for regulatory matters is Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany.
Power Cord Set Requirements The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between 100−120V~ or 200− 240V. The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country where you purchased the equipment. If you need to obtain a power cord for a different country, you should purchase a power cord that is approved for use in that country.
Disposal of Waste Equipment by Users in Private Household in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling or waste electrical and electronic equipment.
Turkey EEE Regulation In Conformity with the EEE Regulation EEE Yönetmeliğine Uygundur ENWW 28
