Hitachi Dynamic Link Manager Software Users Guide for Windows (6.6) (HIT5201-96005, April 2011)

3. Creating an HDLM Environment
81
Windows-installation-drive:\Program Files
(x86)\HDVM\HBaseAgent\bin
Windows-installation-drive:\Program Files
(x86)\HDVM\HBaseAgent\util\bin
HDLM-installation-folder\bin
HDLM-installation-folder\lib
For other versions of Windows:
Windows-installation-drive
:\Program Files\Common Files\Hitachi
Windows-installation-drive:\Program Files\HDVM\HBaseAgent\bin
Windows-installation-drive:\Program
Files\HDVM\HBaseAgent\util\bin
HDLM-installation-folder\bin
HDLM-installation-folder\lib
For Windows Server 2003 SP1 and Windows Server 2003 R2 (with no service
pack), if you do not want to use one of the above methods, you can use a Microsoft
hotfix to start the HDLM manager. For details about how to obtain and use the
hotfix and how it will affect the system, contact Microsoft.
 HDLM uses the Windows Installer service. Therefore, when you install HDLM,
take the following precautions:
1. In the Startup Type setting for the Windows Installer service, specify
Manual or Automatic.
2. Before installing HDLM, make sure that no other programs are using the
Windows Installer service.
If you install HDLM while the Startup Type setting for the Windows Installer
service is disabled or while another program is using the Windows Installer
service, the following message will appear and the installation might fail:
KAPL09034-E An Internal error occurred in the HDLM
Installer. Code = -99 nnnnn
If this message appears during a new installation of HDLM:
Confirm that conditions 1 and 2 above are met, and then install HDLM again.
If this message appears during an upgrade or re-installation of HDLM:
Confirm that conditions 1 and 2 above are met, and then re-attempt an
upgrade or re-installation of HDLM.