Hitachi Dynamic Link Manager Software Users Guide for Windows (6.6) (HIT5201-96005, April 2011)

4. HDLM Operation
175
2. To change the status of paths to online, execute the dlnkmgr command's online
operation.
The paths to be placed online can be specified by using an HBA port, CHA port,
single path, or HBA port WWN. For details on how to specify paths, see
6.5 online (Places Paths Online).
For example, if you want to place all the paths that pass through a specific HBA
port online, execute the
dlnkmgr command's online operation with the -hba
parameter specified. The following shows an example of executing this
command:
>dlnkmgr online -hba 1.1
KAPL01057-I All the paths which pass the specified HBA will
be changed to the Online status. Is this OK? [y/n]:y
KAPL01061-I 3 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
>
3. Check to see if the statuses of all the applicable paths have changed.
The following example shows how to execute the command:
>dlnkmgr view -path
(2) Changing the Status of Paths to Offline(C)
To change the status of paths to
Offline(C):
1. Check the current status of the paths.
To change the status of a path to
Offline(C) by specifying an HBA port, CHA
port, single path, or HBA port WWN, check the path name or PATH_ID used to
manage the path.
The following example shows how to execute the command:
>dlnkmgr view -path
2. To change the status of paths to Offline(C), execute the dlnkmgr command's
offline operation.
The paths to be placed offline can be specified by using an HBA port, CHA port,
single path, or HBA port WWN. For details on how to specify paths, see
6.4 offline (Places Paths Offline).
For example, if you want to place all the paths that pass through a specific HBA