Hitachi Dynamic Link Manager Software Users Guide for Windows (6.6) (HIT5201-96005, April 2011)

6. Command Reference
222
KAPL01061-I 2 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
>
-pathid
AutoPATH_ID
Use this parameter to place a single path online.
Specify the current AutoPATH_ID of the target path, which is displayed by using
the
view operation. For details about the view operation, see 6.7 view (Displays
Information). Leading zeros can be omitted (
000001 and 1 indicate the same
AutoPATH_ID); however, when the target AutoPATH_ID is
000000, enter
000000 or 0 for the parameter value.
AutoPATH_IDs are re-assigned every time the host is restarted. Always make
sure that you use the
view operation to find the current AutoPATH_ID of the
target path, before executing the
online operation.
-hbaportwwn HBA-port-WWN [-tid target-ID -hlun host-LU-number]
Specify this parameter to place online all paths connected to the HBA port
indicated by the specified HBA port WWN. If the
-tid and -hlun parameters
are not specified, all paths on the specified HBA port WWN are placed online.
Only one set of values can be specified for the
-hbaportwwn parameter.
For HBA-port-WWN, specify the value of
HBAPortWWN. The parameter is not
case sensitive.
For target-ID, specify the target ID portion of
PathName. Leading zeroes can be
omitted from the target ID (
0000000000000001 and 1 are the same value). The
parameter is not case sensitive.
For host-LU-number, specify the host LU number portion of
PathName. Leading
zeroes can be omitted from the host LU number (
0001 and 1 are the same value).
To display
HBAPortWWN and PathName, execute the view operation as follows:
>dlnkmgr view -path -hbaportwwn
For details on how to execute the view operation and display the HBA port WWN
and path name, see (3) Parameters Used When Displaying Path Information in
6.7.2 Parameters.
Example
The following shows an example of placing online the paths for which the
HBA port WWN is
10000000C93213BA, target ID is
0000000000000001, and host LU number is 0000 while confirming
command operation.
>dlnkmgr online -path -hbaportwwn 10000000C93213BA -tid
1 -hlun 0
KAPL01050-I The currently selected paths will be changed