Hitachi Dynamic Link Manager Software Users Guide for Windows (6.6) (HIT5201-96005, April 2011)

6. Command Reference
262
PathStatus Status of the displayed paths. The displayed status indicates the following:
•
Online: All paths are available.
•
Reduced: Some paths are not available.
Reduced means that some paths might have an error status, in which case you
should check the status of individual paths and resolve the problem for any paths
that have an error status.
IO-Count Total I/O count for the displayed paths, indicated by a decimal number. The
maximum value that can be displayed is 2
32
- 1 (4294967295). If the total I/O
count reaches the maximum value, it will re-start from 0.
IO-Errors Total I/O error count for the displayed paths, indicated by a decimal number. The
maximum value that can be displayed is 2
32
- 1 (4294967295). If the total I/O
error count reaches the maximum value, it will re-start from 0.
PathID The AutoPATH_ID indicated by a decimal number.
The AutoPATH_ID is assigned every time the host is restarted.
PathName
#1
- The path name, which indicates a path. When you modify the system
configuration or replace a hardware item, you should check the path names to
identify the physical path that will be affected by the change.
Path name consists
of the following four elements, separated by periods:
• Host port number (hexadecimal number)
• Bus number (hexadecimal number)
• Target ID (hexadecimal number)
• Host LU number (hexadecimal number)
For details about each element of the path name and its representation in
Windows, see Table 6-14: Elements of a Path Name.
Displayed Item Description
No
summary
displayed
Summary
displayed