Hitachi Dynamic Link Manager Software Users Guide for Windows (6.6) (HIT5201-96005, April 2011)

7. Utility Reference
311
Specifying an invalid value results in an error.
For details about the function settings, see 6.6 set (Sets Up the Operating
Environment).
#3
If the value exceeds the maximum value, an error occurs.
#4
You can specify this key only in the following cases:
• For a new installation:
When
on is specified for the auto_failback key in the
installation-information settings file
• For an upgrade installation or re-installation:
When
on is specified for the auto_failback key in the
installation-information settings file, or when automatic failbacks are
enabled in the installation pre-settings.
#5
If you want to enable intermittent error monitoring, specify this key after
specifying the
auto_failback and auto_failback_interval keys.
The following shows an example of an installation-information settings file.
[INSTALLATION_SETTINGS]
installfile_location=
workdir=
licensekeyfile=C:\temp\hdlm_license
installdir=D:\Program Files\HITACHI\DynamicLinkManager
storage_emc=n
storage_eva=n
HDLM_core=n
restart=n
[ENVIRONMENT_SETTINGS]
load_balance=on
load_balance_type=exlio
error_log_level=3
error_log_size=9900
error_log_number=2
trace_level=0
trace_file_size=1000
trace_file_number=4
path_health_check=on
path_health_check_interval=30
auto_failback=on
auto_failback_interval=1