HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

192 Chapter 6 GUI Reference
Line Style Path Status
If the intermittent error monitoring functionality is enabled, the line that indicates the error path flashes when an intermittent
error occurs in the path (The line lights for 3 seconds and then goes out for 0.2 seconds, repeatedly).
Placing the mouse pointer over a path displays a tool tip giving the path status (Online, Offline(C), Offline(E), Offline(E)
(intermittent error), Online(E), or Online(E) (intermittent error)) and whether the path is an owner path or non-owner path.
When you click any of the following window components and select a path, the line is displayed thicker than before:
 Line that indicates a path
 HBA port button
 CHA port button
 CHA button
– When using TagmaStore USP
When you display the CHA port in the minimized mode, one of the paths that has the
most impact on the system is displayed when multiple paths connect to the CHA.
The displayed paths are sorted in the following order of path status values:
1. Online(E) (intermittent error)
2. Online(E) or Online(EP)
3. Offline(E) (intermittent error)
4. Offline(E) or Offline(P)
5. Offline(C)
6. Online or Online(P)
CHA port button: These buttons display the CHA port number.
– When using the TagmaStore AMS/WMS series, Thunder 9500V Series, or Thunder 9200
The buttons for the channel adapter ports that are actually connected are usually
displayed as active. If, however, the Type or Status check box specifies that a
connected path is not to be displayed, the CHA port button is displayed as inactive.
Clicking a button displayed as active selects all the paths connected to that clicked
channel adapter port. When using the TagmaStore AMS/WMS (except the TagmaStore
AMS 1000) series, Thunder 9500V Series (except the Thunder 9580V), or Thunder
9200, two CHA port buttons are displayed per CHA button. When using the
TagmaStore AMS 1000 or Thunder 9580V, four CHA port buttons are displayed per
CHA button.
– When using the Lightning 9900V Series, or Lightning 9900 Series
These buttons display the channel adapter port number. The buttons for the channel
adapter ports that are actually connected are usually displayed as active. If,
however, the Type or Status check box specifies that a connected path is not to be
displayed, the CHA port button is displayed as inactive.
Clicking a button displayed as active will select all the paths connected to that
channel adapter port.
When using the Lightning 9900 Series, four of these buttons are displayed for each
CHA button. When using the Lightning 9900V Series, eight of these buttons are
displayed for each CHA button.