HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

240 Chapter 7 Command Reference
Parameter and Program
Information
Item Description
Trace Level Trace output level
 0: Does not output any trace
 1: Only outputs error information
 2: Outputs a summary of program operation
 3: Outputs details of program operation
 4: Outputs all information
Trace File
Size(KB)
Trace file size in kilobytes
Number Of Trace
Files
Number of trace files
Path Health
Checking
 Setting for path health checking
on: Enabled
off: Disabled
 Checking interval
When the setting of the path health checking is
on, the
checking interval of path health checking is displayed within
the parentheses, ( ), after on. The time is in minutes.
Auto Failback  Setting for automatic failback
on: Enabled
off: Disabled
 Checking interval
When the setting of the automatic failback is
on, the checking
interval of automatic failback is displayed within the
parentheses, ( ), after on. The time is in minutes.
Remove LU Setting for Remove LU
 on: Enabled
 off: Disabled
-sfunc
Information about the
HDLM function settings
Intermittent Error
Monitor
 Setting for intermittent error monitoring
on: Enabled
off: Disabled
When automatic failback is off, intermittent error monitoring is
disabled although
Intermittent Error Monitor shows
on. When automatic failback becomes on, intermittent error
monitoring becomes enabled.
 Intermittent error monitoring interval and number of times
that the error is to occur.
When intermittent error monitoring is set to
on, the specified
intermittent error monitoring interval and number of times that
the error is to occur are displayed in parentheses,
(), following
on. The format is number-of-times-error-is-to-
occur/monitoring-interval
. The time is in minutes.
HDLM Manager Status of the HDLM manager
 Alive: Normal
 Dead: Stopped
-msrv
Information about the
HDLM manager
Ver Version number of the HDLM manager