HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 247
Parameters for Displaying Path Information by Selecting a Display Item
When you specify the -path parameter together with the -item parameter, the command
only displays the items specified by the value of the -item parameter. If you specify no
value for the -item parameter, only the PathID and the Status fields are displayed.
Table 7.10 shows the items that can be selected by using the -item parameter and the
parameter values that can be specified after the -item parameter.
Table 7.10 Items Selected Using the -item Parameter and Parameters Specified After the -item Parameter
Selectable Items
Parameter Values Specified After the
-
path
-item Parameter
PathID* None
Status* None
PathName pn
DskName dn
iLU lu
ChaPort cp
Type type
IO-Count ic
IO-Errors ie
DNum dnu
HDevName hd
IEP iep
Because both PathID and Status are always displayed, they do not require any parameters
to be specified.
In the subsequent sub-parameters (following -path -item), you can filter the paths to be
listed (-hdev) and sort the list (-srt). When you omit both parameters, the command
displays information for all the paths in order of increasing AutoPATH_IDs.
The subsequent sub-parameters (following -path -item) are:
 -hdev host-device-name: Filters the information only for the paths accessing the
specified host device. Specify a drive letter to indicate the desired host device. You
cannot specify the host device unless a drive letter has been assigned. The host-
device-name string is case-sensitive. When you specify this parameter, HDevName is
displayed by default. Therefore, it is not necessary to specify hd for the -item
parameter.