HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand

Dynamic Link Manager (HDLM) for Windows

Systems User’s Guide 261

 -exlu: When an HDLM management-target device is the EMC DMX series, EMC CX series,

or HP EVA series. If this parameter is specified when a device managed by HDLM is the

EMC DMX series, EMC CX series, and HP EVA series, the entire 32 digits of the iLU are

displayed without truncating it to 13 digits. If this parameter is not specified, the iLU of

the EMC DMX series, EMC CX series, and HP EVA series is displayed as 16 digits with the

to 16

digits displayed as periods (...). When an HDLM management-target device

is the Thunder 9200/9500V Series, Lightning 9900/9900V Series, TagmaStore, or

Universal Storage Platform V. Fewer than 16 digits are always displayed for the iLU

whether or not this parameter is specified.

 The –t parameter does not display the title for each information item.

The following example shows how to add SLPR, PathName, ChaPort, CLPR, Type IO-

Count, IO-Errors, DNum, and IEP to the displayed items for LU information.

Parameters for Displaying a Summary of LU Information

In the -lu –c parameter, when the -c parameter is specified with the -lu parameter, a

summary of LU configuration information is displayed on a line. The total number of paths

recognized by HDLM and the number of online paths are displayed for each LU.

Note that:

 In the Thunder 9200/9500V Series, Lightning 9900/9900V Series, TagmaStore, and

Universal Storage Platform V, LU information is displayed for each storage subsystem.

 In the EMC DMX series and EMC CX series, LU information is displayed for each vendor ID.

 In the HP EVA series, LU information is displayed for each vendor_ID_product_ID.

You cannot specify the -c parameter together with the -hdev or -pathid parameter.

For details on the contents of each display item, see

Table 7.15.