HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

328 Chapter 9 Messages
Message ID Message Details and Actions
KAPL05010-E Could not initialize the HDLM driver (filter
component). (
aa...aa:bb...bb)
Details
The HDLM driver (filter component) could not be
initialized for each device object.
aa...aa and bb...bb: Device object address
(
aa...aa and bb...bb: Fixed to 0)
Action
Check whether the HDLM driver has started
normally. If it has not started or contains an error,
contact your HDLM vendor or the maintenance
company if there is a maintenance contract for
HDLM and report the error and detail code.
KAPL05011-E Could not attach the HDLM driver (filter
component) to Disk (
aa...aa), Partition
(
bb...bb). (cc...cc:dd...dd)
Details
The path corresponding to Disk (
aa...aa: Disk
sequence number (decimal number)) and
Partition (
bb...bb: Partition number (decimal
number)) could not be registered in the core logic
cc...cc: Error code (hexadecimal number)
dd...dd: Filter driver management table
address (hexadecimal number)
Action
Check whether the HDLM driver has started
normally. If it has not started or contains an error,
contact your HDLM vendor or the maintenance
company if there is a maintenance contract for
HDLM and report the error and detail code.
KAPL05012-I The device (aa...aa) for Disk (bb...bb),
Partition (
cc...cc) is selected for a
mounted drive.
Details
The device object corresponding to Disk
(
bb...bb: Disk sequence number (decimal
number)), Partition (
cc...cc: Partition sequence
number (decimal number)), and (
aa...aa:
Device object address (hexadecimal number)) is
the first path for the LU (including the non-HDLM
target device).
Action
None.
KAPL05013-I The device (aa...aa) for Disk (bb...bb),
Partition (
cc...cc) was removed from the
mounted drive.
Details
The device object corresponding to Disk
(
bb...bb: Disk sequence number (decimal
number)), Partition (
cc...cc: Partition sequence
number (decimal number)), and (
aa...aa:
Device object address (hexadecimal number)) is
the second or subsequent path for the LU.
Action
This is normal operation. If the target drive cannot
be referenced, check the disk configuration.