HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

370 Chapter 9 Messages
Return Code Details and Actions
1026 Details
The getting Path Information has been stopped because the configuration of paths was changed
during the processing of the getting Path Information.
Action
Refresh the host information, check the path status, and then perform the operation again.
1027 Details
The error monitoring interval and the number of times that the error is to occur conflict with the
automatic failback checking interval.
Action
Set the monitoring interval to a value that is equal to or more than (auto failback checking interval x
number of times).
1033 Details
An attempt to acquire the HDLM version information failed.
Action
Re-execute. If the same error occurs even after removing the reservation, execute the DLMgetras
utility for collecting HDLM error information, and then contact your HDLM vendor or maintenance
company if there is a maintenance contract for HDLM. For details, see section
8.2.
1034 Details
An attempt to acquire information about the HDLM version or SP version has failed.
Action
Re-execute. If the same error occurs even after removing the reservation, execute the DLMgetras
utility for collecting HDLM error information, and then contact your HDLM vendor or maintenance
company if there is a maintenance contract for HDLM. For details, see section
8.2.
1035 Details
An attempt to acquire information about the HDLM version or SP version has failed.
Action
Re-execute. If the same error occurs even after removing the reservation, execute the DLMgetras
utility for collecting HDLM error information, and then contact your HDLM vendor or maintenance
company if there is a maintenance contract for HDLM. For details, see section
8.2.
1036 Details
An attempt to acquire information about the HDLM version or SP version has failed.
Action
Re-execute. If the same error occurs even after removing the reservation, execute the DLMgetras
utility for collecting HDLM error information, and then contact your HDLM vendor or maintenance
company if there is a maintenance contract for HDLM. For details, see section
8.2.
1037 Details
A parameter value is invalid.
Action
Refresh the host information, and then perform the operation again. If the same error occurs even
after removing the reservation, execute the DLMgetras utility for collecting HDLM error information,
and then contact your HDLM vendor or maintenance company if you have a maintenance contract
for HDLM. For details, see section
8.2.