HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 371
Return Code Details and Actions
1038 Details
A storage system that cannot use the load balancing function is connected.
Action
Please check a system configuration. One or more connected storage system(s) cannot use the
load balancing function. The load balancing function does not operate on the LUs of that storage
system.
1041 Details
An attempt to communicate with the HDLM Manager has failed.
Action
Check whether the HDLM Manager is running on the host. If it is not running, start the HDLM
Manager.
1042 Details
Information about the path configuration on the specified LU does not match the path configuration
information held by HDLM.
Action
Refresh the host information, check the path status, and then perform the operation again.
1043 Details
The specified LU is an LU of a storage system that cannot use the load balancing function.
Action
Check the storage system of the LU connected by the specified path.
1045 Details
A parameter value is invalid.
Action
Refresh the host information, and then perform the operation again. If the same error occurs even
after removing the reservation, execute the DLMgetras utility for collecting HDLM error information,
and then contact your HDLM vendor or maintenance company if you have a maintenance contract
for HDLM. For details, see section
8.2.
1046 Details
A parameter value is invalid.
Action
Refresh the host information, and then perform the operation again. If the same error occurs even
after removing the reservation, execute the DLMgetras utility for collecting HDLM error information,
and then contact your HDLM vendor or maintenance company if you have a maintenance contract
for HDLM. For details, see section
8.2.