Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

3. Creating an HDLM Environment
101
# echo "123456789ABCDEF" > /var/DLM/dlm.lic_key
• When the license key file has been provided
Store the license key file directly under the
/var/tmp/ directory by using
the
hdlm_license name.
/var/tmp/hdlm_license
Note that the hdlm_license and dlm.lic_key files are deleted after
installation finishes successfully.
10. Insert the HDLM DVD-ROM into the DVD-ROM drive.
If you install HDLM by using a directory to which the DVD-ROM is copied, you
do not have to perform this step.
11. For an upgrade installation, execute the following command:
• When installing HDLM from the DVD-ROM
# /directory-in-which-the-DVD-ROM-is-mounted/installux.sh
or
# installp -aXgd /directory-in-which-the-DVD-ROM-is-mounted/
HDLM_AIX all
• When installing HDLM from the directory to which the DVD-ROM was
copied
# /directory-copied-from-DVD-ROM/installux.sh
or
# installp -aXgd /directory-copied-from-DVD-ROM/HDLM_AIX all
Even though a message asking you to restart the host is displayed during
installation, you do not have to restart the host.
If you execute the
dlmrmdev utility without the -e parameter specified at step 3
or 7 and then the
KAPL09048-E message is displayed, the hdisk for the device
that is managed by HDLM still remains.
If you execute the
dlmrmdev utility with the -e parameter specified at step 3 or
7 and then the
KAPL09048-E message is displayed, the hdisk for the device that
is managed by HDLM still remains, and its status is
Available. Re-execute the
procedure in step 3.
During installation, the
KAPL09241-W message might be output. In this case,
installation of HDLM continues, but installation of HDLM components has
failed. After installing HDLM, resolve the problem according to the
KAPL09241-W message if necessary.