Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

3. Creating an HDLM Environment
104
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 4000
HDLM Driver Ver WakeupTime
Alive
x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time =
yyyy/mm/dd hh:mm:ss
Even when cluster software is being used, the name of the cluster software is not
displayed in
Support Cluster. However, the cluster support function is
operating normally.
19. From the execution result of the
view operation, check that the correct version of
HDLM is installed.
If
HDLM Version is x.x.x-xx, the installed version of HDLM is correct. x.x.x-xx
is the installed version of HDLM.
20. From the execution result of the
view operation, check that the programs are
running properly.
If
HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive, all
programs are running correctly.
If you are not using a virtual I/O server, the upgrade installation or re-installation
of HDLM is complete.
For details about the files to be inherited after the upgrade installation or
re-installation of HDLM, see Table 3-11: List of Files Inherited During an
Upgrade Installation or Re-installation.
21. If you are using a virtual I/O server, define an hdisk as a virtual target device.
Execute the following command on the virtual I/O server:
When creating an hdisk as a virtual target device:
$ mkvdev -vdev
hdisk-name -vadapter virtual-SCSI-server-adapter-name
When creating a logical device as a virtual target device:
$ mkvdev -vdev
logical-volume-name -vadapter
virtual-SCSI-server-adapter-name
22. Execute the following command in the client logical partition to reconfigure the
device: