Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

3. Creating an HDLM Environment
105
# cfgmgr
23. Execute the following command in the client logical partition to confirm that the
physical volume has been recognized as hdisk.
If the following message is displayed, then the physical volume (hdisk) was
recognized correctly.
# lsdev -Cc disk
hdisk1 Available Virtual SCSI Disk Drive
Table 3-11: List of Files Inherited During an Upgrade Installation or Re-installation
lists and describes the files that are inherited during an upgrade installation or
re-installation of HDLM.
Table 3-11: List of Files Inherited During an Upgrade Installation or
Re-installation
File Description
/usr/DynamicLinkManager/config/dlmmgr.xml File for setting up HDLM
functionality
/var/DynamicLinkManager/log/dlmmgr[1-16].log Log files of HDLM
Manager
/var/DynamicLinkManager/log/dlminquiry[1-2].log Log files of HDLM
Inquiry information
/usr/DynamicLinkManager/config/dlmwebagent.properties Hitachi Command Suite
Common Agent
Component settings file
/var/DynamicLinkManager/log/hdlmtr[1-64].log Trace files
/var/DynamicLinkManager/log/dlmconfig[1-2].log Configuration log file
/var/DynamicLinkManager/log/mmap/hdlmtr.mm Trace management file
/var/DynamicLinkManager/log/dlmwebagent[1-16].log Hitachi Command Suite
Common Agent
Component log files
/var/DynamicLinkManager/log/dlmutil[1-2].log HDLM utility's log file
/var/DynamicLinkManager/log/mmap/dlmutil.mm HDLM utility's log trace
management file
/var/DynamicLinkManager/log/installhdlm.log Unattended installation
execution log