Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

3. Creating an HDLM Environment
145
This example shows how to specify the audit log facility:
# /usr/DynamicLinkManager/bin/dlnkmgr set -audfac local0
3.7.3 Checking the Updated Settings
This chapter describes steps involved in how to check the updated settings by using the
dlnkmgr command's set operation after settings have been changed.
When you change some settings, you can display information about all of HDLM
function settings. The following is an example of executing the command:
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys -sfunc
HDLM Version :
x.x.x-xx
Service Pack Version :
Load Balance : on(extended lio)
Support Cluster :
Elog Level : 2
Elog File Size(KB) : 1000
Number Of Elog Files : 5
Trace Level : 1
Trace File Size(KB) : 2000
Number Of Trace Files : 10
Path Health Checking : on(10)
Auto Failback : on(10)
Intermittent Error Monitor : on(2/20)
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time =
yyyy/mm/dd hh:mm:ss
#
After you have set up the collection of audit log data, use the following command to
make sure that the setting has been specified correctly:
local1 or 17 local1
local2
or 18 local2
local3
or 19 local3
local4
or 20 local4
local5
or 21 local5
local6
or 22 local6
local7
or 23 local7
Value Corresponding facility value in the /etc/syslog.conf file