Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

3. Creating an HDLM Environment
151
4. In the Hitachi Network Objectplaza Trace Library setup menu, type 5 and then
press the Enter key.
A screen to set the monitoring interval will appear. The current value is displayed
in Current Span (sec).
5. Enter the desired interval in New Span (sec).
The specifiable range is between 1 second and 300 seconds, with a default of 10.
We recommend setting a value of 5 when collecting an integrated trace.
To leave the monitoring interval as is, leave New Span (sec) blank, enter
! and
press the Enter key. You will be returned to the Hitachi Network Objectplaza
Trace Library setup menu.
6. Press the Enter key.
The new setting is applied and the Hitachi Network Objectplaza Trace Library
setup menu appears again.
3.8.6 Adjusting the Number of Messages to be Output Per
Monitoring Interval
This section explains how to adjust the number of messages output to fit a particular
monitoring interval.
To adjust the number of messages to be output per monitoring interval:
1. In the Hitachi Network Objectplaza Trace Library setup menu, type
6 and then
press the Enter key.
A screen to set the monitoring interval for the amount of messages output to the
integrated trace file will appear. The current value is displayed in Current Span
(sec).