Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

3. Creating an HDLM Environment
152
2. Enter a desired interval in New Span (sec).
The specifiable range is between 0 and 3600 seconds, with a default of 0. We
recommend setting a value of 0.
To leave the monitoring interval as is, leave New Span (sec) blank, type
! and
press the Enter key. You will be returned to the Hitachi Network Objectplaza
Trace Library setup menu.
Note that when you specify a monitoring interval of 0, even if you specify the
maximum number of messages in 7: Max messages per span, the amount of
integrated trace information to be output will not be adjusted.
3. Press the Enter key.
The new setting is applied and the Hitachi Network Objectplaza Trace Library
setup menu appears again.
4. In the Hitachi Network Objectplaza Trace Library setup menu, type
7 and press
the Enter key.
A screen to set the maximum number of messages output to the integrated trace
file based on the monitoring interval specified in 6: Lookout span will appear.
The current value is displayed in Current Max (sec).
5. Adjust the maximum number of messages output to the integrated trace files in
New Max (sec).
The specifiable range is between 0 messages and 500 messages, with a default of
0. If you want to increase the number of messages which are output to the
integrated trace file as much as possible, we recommend setting a value of 0.