Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

3. Creating an HDLM Environment
170
2. Execute the following command to activate the volume group that is using the
virtual SCSI disk of the HDLM management-target hdisk:
# varyonvg
volume-group-name
3. Execute the following command to mount the file system used to configure
volume groups in the client logical partition:
# mount
file-system-mount-point
4. Execute the following command to back up the volume group in the client logical
partition:
# savevg -i -f
any-file-name-or-device-volume-name volume-group-name
5. Execute the following command to unmount the file system in the client logical
partition:
# umount
file-system-mount-point
6. Execute the following command to delete the volume group in the client logical
partition:
# reducevg -df
volume-group-name hdisk-name
7. Execute the following command to delete the virtual SCSI disk in the client
logical partition:
# rmdev -dl
hdisk-name
8. Execute the following command to delete the virtual target device in the virtual I/
O server:
$ rmdev -dev vtscsin
If the boot disk is in a single-path configuration, proceed to step 12.
9. If the boot disk is in a multi-path configuration, execute the following command
to shut down the host.