Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

6. Command Reference
246
# /usr/DynamicLinkManager/bin/dlnkmgr view -lu
For details on how to execute the view operation and display the host device
name and OS management path ID, see (3) To Display LU Information in
6.7.2 Parameters. Only one set of values can be specified for the
-hdev
parameter. This parameter is not case sensitive.
Example
The following shows an example of placing online path for which the host
device name is
hdisk0 and OS management path ID is 00001 while
confirming command operation.
# /usr/DynamicLinkManager/bin/dlnkmgr online -path -hdev
hdisk0 -ospathid 1
KAPL01050-I The currently selected paths will be changed
to the Online status. Is this OK? [y/n]:y
KAPL01061-I 1 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
-s
Executes the command without displaying the message asking for confirmation
of command execution from the user. Specify this parameter if you want to skip
the response to the confirmation message: for example, when you want to execute
the command in a shell script or batch file.
Example
The following example shows how to place a path, whose AutoPATH_ID is
000002, online without asking for confirmation of command execution
from the user:
# /usr/DynamicLinkManager/bin/dlnkmgr online -pathid 2
-s
KAPL01061-I 1 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
(2) To Display the Format of the Online Operation
-help
Displays the format of the online operation.
Example
The following example shows how to display the format of the
online
operation: