Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

6. Command Reference
249
6.6 set (Sets Up the Operating Environment)
The dlnkmgr command's set operation sets the HDLM operating environment.
6.6.1 Format
(1) To Set Up the HDLM Operating Environment
/usr/DynamicLinkManager/bin/dlnkmgr set
{-lb {on [-lbtype {rr|exrr|lio|exlio|lbk|exlbk}]|off}
|-ellv
error-log-collection-level
|-elfs error-log-file-size
|-elfn number-of-error-log-files
|-systflv trace-level
|-systfs trace-file-size
|-systfn number-of-trace-files
|-pchk {on [-intvl checking-interval]|off}
|-afb
{on [-intvl checking-interval]|off}
|-iem { on [-intvl
error-monitoring-interval]
[-iemnum
number-of-times-error-is-to-occur] | off }
|-lic
|-audlog {on [-audlv
audit-log-data-collection-level] [-category
[[ss] [a] [ca]|all]]|off}
|-audfac
facility-value}
[-s]
(2) To Display the Format of the Set Operation
/usr/DynamicLinkManager/bin/dlnkmgr set -help
6.6.2 Parameters
(1) To Set Up the HDLM Operating Environment
Table 6-2: Default and Recommended Values shows the defaults and recommended
values for each setting. If you change the value of the
set operation, the new value
takes effect immediately.