Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

7. Utility Reference
336
7.12 installhdlm Utility for Installing HDLM
This utility is used to execute an unattended installation when a new installation,
upgrade installation, or re-installation of HDLM is being performed. You can perform
an unattended installation even when you are installing HDLM in a boot disk
environment. Before you perform an unattended installation, you must define the
information that is required during the installation in the installation information
settings file.
For details about how to perform an unattended installation, see 3.5.8 Performing an
Unattended Installation of HDLM.
7.12.1 Format
/directory-in-which-the-DVD-ROM-is-mounted-or-copied/HDLM_AIX/hdlmtool/
instutil/installhdlm { -f
installation-information-settings-file-name | -h}
7.12.2 Parameters
-f installation-information-settings-file-name
Defines the information needed for installing HDLM.
For details about the installation-information settings file, see 7.12.3 Items To Be
Defined in an installation-information Settings File.
-h
Displays the format of the installhdlm utility.
7.12.3 Items To Be Defined in an installation-information Settings
File
The following describes the information defined in the installation information
settings file.
[INSTALLATION_SETTINGS] section
This section defines information that is used when the installhdlm utility is
executed. Specify this section name at the beginning of the installation information
settings file (although an empty paragraph or comment line can be inserted above this
section name).
Table 7-5: Keys in the [INSTALLATION_SETTINGS] Section lists the keys defined in
the
[INSTALLATION_SETTINGS] section.