Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

7. Utility Reference
345
[DISK_DEFAULT_SETTINGS]
reserve_policy=PR_exclusive
[ODM_SETTINGS]
odm_lun_reset=off
odm_online_e_io_block=off
odm_npiv_option=off
[ENVIRONMENT_SETTINGS]
load_balance=on
load_balance_type=exlio
error_log_level=3
error_log_size=9900
error_log_number=2
trace_level=0
trace_file_size=1000
trace_file_number=4
path_health_check=on
path_health_check_interval=30
auto_failback=on
auto_failback_interval=60
intermittent_error_monitor=off
# intermittent_error_monitor_interval=210
# intermittent_error_monitor_number=3
Note:
• If a hash mark (
#) is placed at the beginning of a line in the installation
information settings file, that line is assumed to be a comment.
• If you do not want to specify a key, enter a hash mark (
#) at the beginning of
the line that defines that key.
7.12.4 Log file
A log file (installhdlm.log) is output after an unattended installation of HDLM.
The following explains the
installhdlm.log file.
•
installhdlm.log is created in the folder whose path is specified by the
logdir key in the installation-information settings file. Do not share the log file
output directory among the hosts on which unattended installation is being
performed. If no value is specified for
logdir key, the log file is output to the /
var/tmp
directory.
• If
installhdlm.log already exists, log information is added to this log file. For
details about the unused capacity required for the log output directory, see
3.5.8 Performing an Unattended Installation of HDLM.
Note
• Note that installhdlm.log is not deleted after HDLM is uninstalled.