Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

8. Messages
361
KAPL01053-I
If you are sure that there would be no problem when the path is
placed in the Offline(C) status, enter y. Otherwise, enter n.
[y/n]:
Details
The
offline operation will be started. To continue the offline operation, enter
y. To cancel the operation, enter n.
Action
If you want to execute
offline processing, enter y. If you want to terminate
processing, enter
n. For details on the offline operation, see 6.4 offline
(Places Paths Offline).
KAPL01054-W
During the offline operation processing of the HDLM command, a
path that cannot be placed in the Offline(C) status was detected.
PathID = aa...aa Would you like to continue the processing of the
offline operation? [y/n]:
Details
A path that cannot be set to Offline(C) was detected during multipath offline
processing. To ignore this path and perform offline processing for the next path,
enter
y. To cancel offline processing, enter n.
aa...aa: Path ID (decimal (base-10) number)
Action
If you want to continue processing the
offline operation of the HDLM
command for other paths, enter
y. If you want to terminate processing, enter n.
For details on the
offline operation, see 6.4 offline (Places Paths Offline).
KAPL01055-I
All the paths which pass the specified aa...aa will be changed to
the Offline(C) status. Is this OK? [y/n]:
Details
Multiple paths will be collectively set to Offline(C) because the
-hba or -cha
parameter was specified. To collectively set place multiple paths to Offline(C),
enter
y. To cancel the operation, enter n.
aa...aa:
CHA port, HBA
Action
If you want to execute
offline processing for the paths that meet the specified
requirements, enter
y. If you want to terminate processing, enter n.