Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

8. Messages
368
KAPL01084-W
An attempt to delete the license key file has failed. File name
= aa...aa
Details
aa...aa:
/var/tmp/hdlm_license
Action
If a license key file exists, delete it.
aa...aa:
/var/tmp/hdlm_license
KAPL01088-W
The specified parameter values cannot be specified at the same
time. Operation name = aa...aa, parameter = bb...bb, parameter values
= cc...cc
Details
aa...aa:
view
bb...bb: Parameter name
cc...cc: Parameter values that cannot be specified at the same time
Action
Execute
help operation-name of the HDLM command (dlnkmgr) to check
which parameter can be specified, and then retry. For details on the
help
operation, see 6.3 help (Displays the Operation Format).
KAPL01089-E
One of the following was executed at the same time as an HDLM
command set -lic operation: another set -lic operation, or an
update of the license for an update installation.
Action
Check the license by using the HDLM command's
view -sys -lic operation.
If necessary, re-execute the HDLM command's
set -lic operation. If the same
error message is output again, contact your HDLM vendor or the maintenance
company if there is a maintenance contract for HDLM.
Do not perform the following operations:
• Simultaneously execute the HDLM command's
set -lic operation with
the
view -sys -lic operation.
• Execute the HDLM command's
set -lic operation while the license for an
upgrade or re-installation is being updated.