Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

8. Messages
370
None.
KAPL01101-W
The target HBA port was not found. Operation name = aa...aa
Details
The HBA having the HBA_ID specified in the
-hbaid parameter could not be
found.
aa...aa:
offline, online
Action
Use the view operation of the HDLM command (
dlnkmgr view -hba) to check
the target HBA port and the HBA_ID of the target HBA port. After that, specify
the appropriate HBA_ID, and then retry.
KAPL01102-I
All the paths which pass the specified aa...aa port will be changed
to the Offline(C) status. Is this OK? [y/n]:
Details
Multiple paths will be collectively placed Offline(C) because the
-hbaid or
-chaid parameter was specified. To collectively place multiple paths Offline(C),
enter
y. To not collectively place them Offline(C), enter n.
aa...aa: CHA, HBA
Action
If you want to execute the offline processing for the paths which pass the specified
target, enter
y. If you want to terminate the processing, enter n.
KAPL01103-I
If you are sure that there would be no problem when all the paths
which pass the specified aa...aa port are placed in the Offline(C)
status, enter y. Otherwise, enter n. [y/n]:
Details
This message re-asks the user whether to place all the paths Offline(C). To place
all the paths Offline(C), enter
y. To not place them Offline(C), enter n.
aa...aa: CHA, HBA
Action
If you want to execute the offline processing for the paths which pass the specified
target, enter
y. If you want to terminate the processing, enter n.
KAPL01104-I
All the paths which pass the specified aa...aa port will be changed
to the Online status. Is this OK? [y/n]: