Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

8. Messages
390
processed by the alert driver.
bb...bb: error code (hexadecimal number)
cc...cc: 0 (fixed)
Action
Check the message of the HDLM command (
dlnkmgr) or HDLM manager, and
then take the appropriate action. If you do not know the appropriate action,
execute the
DLMgetras utility for collecting HDLM error information, and then
contact your HDLM vendor or the maintenance company if there is a maintenance
contract for HDLM and report the error and detail code. For details on the
DLMgetras utility, see 7.2 DLMgetras Utility for Collecting HDLM Error
Information.
KAPL06013-E
Could not write log information into the log buffer.
(aa...aa:bb...bb)
Details
When a log output request was made from the filter driver, the log information
was discarded because of a memory allocation failure. Alternatively, although an
HDLM driver message or HDLM alert driver message, or a non-emergency
message (C/I) by the core logic was generated, its log information was discarded
by the HDLM alert driver.
aa...aa: log message code (hexadecimal number)
bb...bb: log area size (hexadecimal number)
Action
Check whether any other error occurred. The information that could not be
written is discarded.
Review the actual memory size when another error does not occur.
When the actual memory size is insufficient, increase the actual memory size.
When the actual memory size is sufficient, execute the
DLMgetras utility for
collecting HDLM error information, and then contact your HDLM vendor or the
maintenance company if there is a maintenance contract for HDLM. For details
on the
DLMgetras utility, see 7.2 DLMgetras Utility for Collecting HDLM Error
Information.
KAPL06014-E
Could not write emergency information into the emergency
information buffer. (aa...aa:bb...bb)
Details