Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

8. Messages
394
ee...ee: Target ID (hexadecimal number)
ff...ff: Host LU number (same as PathName of
view -path) (hexadecimal
number)
gg...gg: Dev number (same as DNum of
view -path) (decimal number)
hh...hh: Host device name
Action
There could be an error in the path. See 5.3 What To Do for a Path Error and
restore the path displayed in the message to running status.
KAPL08023-I
A path was recovered. PathID = aa...aa, PathName =
bb...bb.cc...cc.dd...dd.ee...ee, DNum = ff...ff, HDevName = gg...gg
Details
The path has been recovered.
aa...aa: Path ID (same as PathID of
view -path) (decimal number)
bb...bb: HBA adapter number or Adapter type (same as PathName of
view
-path) (character string)
cc...cc: Bus number or Adapter number (character string)
dd...dd: Target ID (hexadecimal number)
ee...ee: Host LU number (same as PathName of
view -path) (hexadecimal
number)
ff...ff: Dev number (same as DNum of
view -path) (decimal number)
gg...gg: Host device name
Action
None.
KAPL08026-E
An error occurred on all the paths of the LU. PathID = aa...aa
Details
An error occurred in the last, remaining path of an LU. (This is most likely as a
result of a disconnection.)
aa...aa: Path ID (same as PathID of
view -path) (decimal (base-10) number)
Action
Errors are detected in all the paths connected to the LUs. See 5.3 What To Do for
a Path Error to make the path shown in the error message or the paths connected