Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

8. Messages
416
If the status of HDLM is not COMMITTED:
Perform uninstallation or cleanup according to the displayed status. If an
uninstallation or cleanup attempt fails, contact either your HDLM vendor or
the maintenance company (if an HDLM maintenance contract exists).
KAPL09238-W
The specified file is not a normal one. Fail name = aa...aa
Details
A file other than a normal one (for example, a directory file or a special file.) is
specified.
aa...aa: Specified file name (character string)
Action
Specify the correct file, and then retry the operation.
KAPL09239-I
The system will now restart.
Details
The host will restart because restart was specified in the installation information
settings file.
Action
none.
KAPL09241-W
An attempt to install an HDLM component failed. Error Code =
aa...aa
Details
An attempt to install an HDLM component failed.
aa...aa: Error number that identifies the executed processing
Action
If there is no need to access the Hitachi Command Suite products that use HDLM
remote access interface, no action is required. Note that this requires no particular
action, because HDLM operation is not affected when linkage with Global Link
Manager is not used.
If the error code is
3 or 100:
Wait a while, and then execute
dlminstcomp utility.
If the error code is
5:
Install a prerequisite JDK version, and then re-execute
dlminstcomp utility.